 P116 Panels
Ultra-Fine Filtration and Oil-Free
Air for Engine and Compressor Air Intake Systems
The P116 dry-type filter provides oil-free air and high efficiency filtration of fine particles. It is often used as final filter in multi-filter systems. The filter is manufactured from a special polyester media.
Construction
P116 panels are available in 2” or 4” thicknesses. Enclosing channels are 16 gage hot dipped galvanized steel. Filter media is encased between 2 layers of 3x3 galvanized wire cloth. Bail wire folding handles are provided when specified on the order.
 Performance
Efficiency: Standardized laboratory test on the P116 panel indicate virtually 100% arrestment of particles 7 microns in size and over 90% arrestment of 3 micron particles.
Resistance: When clean, resistance to airflow through a 2” thick P116 is .25 H 2O @ 100 fpm and 1.1” H 2O @ 500 fpm. Through a 4” thick panel resistance is .15” H 2O @ 100 fpm and .60” H 2O @ 500 fpm.
Sizes
P116 filters are available in production quantities in any rectangular size up to 1050 square inches and/or a maximum length of 35 inches.
Servicing
P116 filters can be cleaned with compressed air or a commercial dry cleaning solvent. The P116 can also be washed in clear water, or a solution of water and a mild detergent. Filters should be completely dry before placing back in service.
P116 filters are classified by Underwriters Laboratories Inc.®
Common Sizes, Capacities and Weights
|
|
|
|
125127-1
125127-2
125127-3
125127-4
125127-5
125127-6
125127-7
125127-8
|
16x20x2
16x25x2
20x20x2
20x25x2
16x20x4
16x25x4
20x20x4
20x25x4
|
640
800
800
1000
640
800
800
1000
|
9.5
11.5
11.5
13.0
18.0
22.5
22.5
26.0 |
Note: Other sizes available on request.
|
